GAOROBAM GX PUMP E – CS4 – I 400 bar Air Gun Compressor

Description

The GAOROBAM GX PUMP E-CS4-I air gun compressor features a new, improved 350W motor and uses four-stage compression technology. It operates very smoothly and is very quiet, at only 70 dB. Maximum pressure: 5800 psi/40 MPa. Note: First check the maximum safe pressure of your gas cylinder; do not overinflate, as this will cause safety issues. It is also equipped with a dual-needle pressure gauge and a two-stage pressure adjustment for automatic shut-off, which makes it safer. A water tank and an oil reservoir are built into the top of the compressor. Excellent cooling allows for 5 hours of continuous operation and can fill a gas cylinder with a maximum capacity of 6.8 liters. Note: Before first use, fill with 300 ml of antifreeze (plain water is not recommended). Note: 1) Be sure to add neutral antifreeze if your area experiences freezing temperatures. 2): Do not turn the grease knob until 6 hours of use have passed; otherwise, this will result in poor performance. After that, turn it one full turn. 15% faster filling speed: Filling a 0.5-liter tank from 3,000 psi to 4,500 psi takes only 4-5 minutes. Filling a 0.5-liter tank from 0 to 4,500 psi takes only 14-16 minutes. We do not recommend filling large tanks, such as those over 6 liters, as this will take a long time. Built-in 220 V to 12 V DC converter: Compared to the GX E-CS4, the CS4-I features a built-in converter for added convenience. You can use a car battery or a household outlet as a power source. The unit is also equipped with a built-in oil-water separator that never needs replacing, so there is no need to purchase additional external oil-water separators. Please read the user manual carefully before turning on the compressor. All GX pumps come with a 12-month warranty and lifetime technical support. Product dimensions: 11.8 x 6.1 x 12.4 inches, weight: 29 pounds (11.8 x 6.1 x 12.4 inches),

CAUTION: When filling is complete, first close the bottle valve (when filling the bottle) and then open the compressor’s bleed valve to release the pressure in the line. All pressure must be released from the compressor before starting. Note: When adding coolant for the first time, fill the reservoir, turn on the switch (do not press the start button), the water pump will run, coolant will flow through the internal water lines, and then continue adding coolant until the reservoir is full. Helpful Tips: When filling a cylinder that has internal pressure-for example, 3,000 psi to start-and you want to fill it to 4,500 psi, 1. Connect the compressor hose to the cylinder, keep the cylinder valve closed, and start the compressor. 2. When the compressor’s pressure gauge reads higher than the pressure in the cylinder, open the cylinder valve.

Specifications for the GAOROBAM GX PUMP E-CS4-I Airgun Compressor

• Power: 350W
• Voltage: 110V/220V AC or 12V car battery
• Motor Speed: 2700 rpm
• Air Flow Rate: 11 L/min
• Weight: 15 kg
• Noise level: 70 decibels
• Cooling system: water cooling + fan
• Automatic shut-off
• Moisture filter: built-in
• Maximum operating pressure: 400 bar/5,800 psi
• Continuous operating time: 4 to 5 hours
• Maximum cylinder volume: 6.8 L

Video

Additional information

Reviews (0)