DPM Spring for DPM CZ 75 P – 07 Duty Version 1 & 2 Combat Pistols

Description

The DPM Recoil Spring for CZ 75 P-07 Duty Version 1 & 2 Combat PistolsThe DPM recoil reduction system is a direct replacement for the recoil block and does not alter the pistol’s configuration. This system operates via a multi-spring assembly (3 springs) and controls the pistol’s functionality. The third spring, contained within the rod, controls the slide’s movement so that it never strikes the frame. The system includes 1 spring plug and 2 different external springs. The external springs are of different lengths; the long spring is heavy, while the short one is light, allowing the shooter to finely tune the pistol’s open and closed positions (slide movement) according to their personal preferences.

WARNING: The spring plug must always be installed with the DPM system ONLY in version 2 models. To determine which version of the P-07 you have (1 or 2), place the DPM guide rod on the front side of the slide; if it stops at the first flange, then you have Version 1, where you should not install the spring plug. If the DPM guide rod extends all the way to the end, then you have version 2, for which installing the spring plug is mandatory.

**Since we at DPM are leading the evolution of recoil reduction technology, product versions may change (new designs with different springs, with or without plugs, washers, etc.) without prior notice.**

Specifications of the DPM Spring for DPM CZ 75 P-07 Duty Version 1 & 2 Combat Pistols

• Short Spring: 10 lbs
• Long Spring: 11 lbs
• Open slide position: 24 pounds (approx.)
• – Faster consecutive shots
• – Improved rate of fire
• – protects the slide and frame
• – eliminates jams caused by jamming
• – significantly reduces recoil
• – improved grouping on double shots
• – better control and greater accuracy
• The kit includes 3 buffer tubes of different lengths and 4 different external springs
• Manufactured in Greece

Video

Additional information

Reviews (0)