Sawyer Squeeze Filter Accessory Kit for Attaching to a Container
20.50 € / 40.09 лв.
Description
The Sawyer Squeeze accessory kit allows you to connect the filter to a container as a gravity filtration system. The connection is extremely easy and quick. It is suitable for use with Sawyer Squeeze or Mini water filters. You will need a container; use the drill bit included in the kit to drill a hole approximately 4 centimeters above the bottom of the container (bucket). Remove any plastic fragments around the hole, as they can cause leaks. Take one of the rubber rings and place it over the threads of the black adapter. Then, push the adapter’s threaded end through the hole from the outside. Slide the second rubber ring from the inside of the container around the adapter’s threads. Then tighten the plastic bolt against it. Place the gray hose on the outside over the adapter’s spout and attach the gray connector to the other end of the hose. Pour the dirty water into the bucket, and all you have to do is connect the water filter (not included) to filter the water!
Specifications for the Sawyer Squeeze Filter Accessory Kit for Connecting to a Container
- Drill bit
- Adapter
- Tube
- Two rubber rings
- Plastic bolt
- Connector
- Water filter hanger
Check out our offers for water filters .
Video
No video available for this product.
Additional information
| Manufacturer |
|---|
Reviews (0)
Be the first to review “Sawyer Squeeze Filter Accessory Kit for Attaching to a Container”
You must be logged in to post a review.
Reviews
There are no reviews yet.