UTG PRO® P.O.I® 1″ Picatinny Scope Rings, Low Profile
130.50 € / 255.24 лв.
Description
The UTG PRO® P.O.I® 1″ Picatinny Scope Rings, Low Profile have a center height of 0.91 inches or 23.8 mm to fit optics with a 1-inch tube and an outer lens diameter of up to 45 mm. Patented P.O.I. locking plate and precision optical interface design: a) low-profile steel locking side plate, controlled by two spring-loaded guide rods for easy installation; b) Integrated square-shaped recoil stop for full contact with the slot surface, Picatinny rail, and secure, repeatable zero retention; c) Upper and lower rings, precision-machined from a single piece of aluminum for an exact inner diameter and seamless interaction between the ring and the optics. A 2-piece ring set with a ring width of 22 mm, Torx locking mechanism, and 4 Torx screws on top. Designed to fit platforms with MIL-Spec 1913 Picatinny rails. Made from 6061-T6 aluminum with a steel core and a matte black hard anodized finish. Designed for .50 BMG.
We recommend tightening the screws on the top of the ring to a torque of 2.8 Nm and the screw on the side plate to a torque of 5.1 Nm.
Video
No video available for this product.
Additional information
| Manufacturer |
|---|
Reviews (0)
Be the first to review “UTG PRO® P.O.I® 1″ Picatinny Scope Rings, Low Profile”
You must be logged in to post a review.



































Reviews
There are no reviews yet.