UTG PRO P.O.I 30 mm Picatinny Scope Rings, Low Profile

130.50  / 255.24 лв.

Курс: 1 EUR = 1.95583 BGN Category:
28 days to return a product
Buy withtbi bank logo
13 x €6.14 (13 x 12.00 лв.)

12 x 12.45 евро

Купи на изплащане със стоков кредит от Банка ДСК

• Улеснена процедура за електронно подписване
• Атрактивни условия по кредита
• Параметри изцяло по Ваш избор
• Одобрение до няколко минути изцяло онлайн

Размер на кредита /евро/
Месечна вноска /евро/
Обща дължима сума /евро/
ГПР /%/
Изчисленията са направени при допускането за първа падежна дата след 30 дни и са с насочваща цел. Избери най-подходящата месечна вноска.

Description

The UTG PRO P.O.I 30 mm Picatinny Scope Rings, Low Profile have a center height of 0.98 inches or 25 mm to fit optics with a 30 mm tube and an outer lens diameter of up to 49 mm. Patented P.O.I. locking plate and precision optical interface design: a) low-profile steel locking side plate, controlled by two spring-loaded guide rods for easy installation; b) Integrated square-shaped recoil stop for full contact with the slot surface, Picatinny rail, and secure, repeatable zero retention; c) Upper and lower rings, precision-machined from a single piece of aluminum for an exact inner diameter and seamless interaction between the ring and the optics. A 2-piece ring set with a ring width of 22 mm, Torx locking mechanism, and 4 Torx screws on top. Designed to fit platforms with MIL-Spec 1913 Picatinny rails. Made from 6061-T6 aluminum with a steel core and a matte black hard anodized finish. Designed for .50 BMG.

We recommend tightening the screws on the top of the ring to a torque of 2.8 Nm and the screw on the side plate to a torque of 5.1 Nm.

Video

No video available for this product.

Additional information

Manufacturer

Reviews (0)

Reviews

There are no reviews yet.


Be the first to review “UTG PRO P.O.I 30 mm Picatinny Scope Rings, Low Profile”